JC Madigan, Inc / Air-Flo Sanders



Photo needed here	Air-Flo Spreaders	We Not Only Sell Truck Equipment, We Stock it! Home AF24-D PS-8E

Ice Control Spreader Model AF24-D
Features and Specifications

Hopper

Fully welded 10 ga. steel
Front Panel has 25° slope
Sides have 45º slope,
10 gauge steel gussets welded at bottom to 3" channel
Rear Feedgate controlled by 7Gauge door

Conveyor

7 gauge steel side channels
Tensile chain strength of 42,000 lbs.
50:1 worm gearbox drive, 2" output shaft

Material Chute

Fully enclosed 10 gauge steel construction
3 external adjustable deflectors
2 internal baffles, adjustable without tools
Swings above bottom of conveyor for ground storage
Spreads material from 4-40 feet.

Spinner

Powered by high-speed hydraulic motor
In-cab controls

Photo Needed here

A tough, rugged, trouble-free spreader with
capacities from 5.0 cubic yeards to
11.2 cubic yards (without hopper extensions).

Options

Corten and stainless steel hopper
Hopper extensions
Dump body or chassis mount
Screens
Engine driven hydraulic system with choice of 18 HP Briggs & Stratton or Wisconsin engine.

Spreader Specifications

Model Number	Hopper Length	Body Length	Stuck Capacity (cubic yds)	Rounded Capacity (cubic yds)	6" Ext. Capacity (cubic yds)	12" Ext. Capacity (cubic yds)	Weight (Lbs)	Truck CA (inches)
AF24-D-8	8'	9' 2"	5.0	5.6	1.0	2.0	1830	60
AF24-D-9	9'	10' 2"	5.5	6.3	1.1	2.3	1940	60-72
AF24-D-10	10'	11' 2"	6.0	7.0	1.2	2.6	2060	72-84
AF24-D-11	11'	12' 2"	6.5	7.2	1.3	2.9	2190	84
AF24-D-12	12'	13' 2"	7.0	8.4	1.4	3.2	2320	102
AF24-D-13	13'	14' 2"	7.5	9.1	1.5	3.5	2450	102
AF24-D-14	14'	15' 2"	8.0	9.8	1.6	3.8	2580	102-112
AF24-D-15	15'	16' 2"	8.5	10.5	1.7	4.1	2720	112-124
AF24-D-15	16'	17' 2"	9.0	11.2	1.8	4.4	2850	124-130

Ice Control Spreader Model PS-8E
Features and Specifications

Photo Needed Here

Options

Top screens.
6" Hopper extensions
12" spinner and deflector extensions
hydraulic cab controls
Honda engine

Features

Available in mild or stainless steel.
One piece 12 gauge steel hopper/conveyor
3 Gussett supports on sides
Replaceable, bolt-in, 10 gauge bottom panel.
Inverted "V" over conveyor.
Sealed greasable drive and idler shaft bearings.
1" spinner shaft.
8.5 I/C Briggs and Stratton engine with electronic clutch.
12 volt electric starter.
Electric throttle control.
In-cab controls.

Spreader Specifications

Body Length	96"	Spinner Diameter	12"
Overall Length	113"	Gate	12" x 4.5"
Capacity (struck)	1.7 cu. yds.	Body width: Top	54"
Weight	625 lbs.	Body Width: Bottom	13"
Body Construction	12 ga. steel	Body Height	31.5"
Side Slope	45°	Overall Width	54"
Conveyor	12" wide

Top of page

J. C. Madigan, Inc
Shaker Road
PO Box 745
Harvard, MA 01451

(978) 772-2067
FAX: (978) 772-2219