| Easterner
Photos |
Specs for
Easterner 2-3 yd. Dump |
2 - 3 Yd. Easterner with new Snap
Latch Tail Gate
Easterner With Knapheide Backpack.
Backpacks, L-Packs, and Underbody Boxes Available in Steel and Aluminum
|
Ideal for Contractors, Municipalities, Landscapers and Others
Length: 8' 4"
(4" sloped tailgate) or 9' 4"(Ford)
Construction:
Prime 10 Gauge Carbon Steel
Understructure:
7 - 3" Structural Steel (A-36) Cross Members.
5" Structural Steel (A-36) Long Members.
Floor:
10 Gauge Prime Steel
6' 6" inside width (9' 4" has 7' inside width)
Sides:
10 Gauge Prime Steel
13" Standard Height
6" Board Pockets
Sloped Rub Rails
Boxed Top Side Rail
Side Stiffeners |
New "Snap-Latch" Tailgate
|
Full Depth Rear
Corner Posts and Rear Light Apron
Double Panel Side Wall
Tailgate:
New "Snap-Latch" (patent
pending)
10 Gauge Prime Steel
19" High
Double Sided, Six (6) Panel,
Boxed Perimeter and Horizontal Bracing
Manually Operated Lever Control
Flame Cut Hardware |
 |
Cab Shield:
18" Overhang, Optional 24", 30", and
custom design
Contour Cut End Plates
8" X 20" Cab Shield Window with 9 Gauge Expanded Metal
Guard
Hoist Frame:
Heavy Duty Hoist/Sub Frame
Class 10 Hoist STD
5" cylinder (Double Acting)
6.25 ton @ 2000Psi
Pilot operated check valve on cylinder
Twin Body Pumps
Body removable by 3 pins |
| Easterner
Hoist |
Specs for Easterner II 3-4 yd. Dump |
|
Ideal for Contractors, Municipalities, Landscapers and Others
Length: 8'
4" (4" sloped tailgate)
Construction:
Prime 10 Gauge Carbon Steel
Understructure:
7 - 3" Structural Steel (A-36) Cross Members.
5" Structural Steel (A-36) Long Members.
Floor:
10 Gauge Prime Steel
6' 6" inside width
|
 Easterner II With Canvas Roller, and
Pintle plate with Hitch and "D" Rings |
Sides:
10 Gauge Prime Steel
19" Standard Height
6" Board Pockets
Sloped Rub Rails
Boxed Top Side Rail
Side Stiffeners
Full Depth Rear Corner Posts and Rear Light Apron
Double Panel Side Wall
Tailgate:
10 Gauge Prime Steel
25" High
Double Acting, Nine (9) Panel,
Boxed Perimeter and Horizontal Bracing
Manually Operated Lever Control
Flame Cut Hardware |
 |
Cab Shield:
18" Overhang, Optional 24", 30" and
custom design.
Contour Cut End Plates
Hoist Frame:
Heavy Duty Hoist/Sub Frame
Class 20 Hoist STD
6" cylinder (Double Acting), 19" Stroke
9 ton @ 2750Psi
Pilot operated check valve on cylinder
Twin Body Pumps
Body removable by 3 pins
Weight: 1820 Lbs.
|
Easterner Platform Dump with added custom
tailgate.
|
Other
Models Available:
10' body
Drop-side contractor body
8' Single rear wheel dumpCall for
details: (978) 772-2067 |
