|
®
EVEREST EQUIPMENT INC.
|
|
Model:
"RM" Medium Duty - Trip Edge
Polymer Moldboard Plow
|
|
►36” high moldboard curl.
►15 degree blade attack angle with heavy duty trip edge
design.
►Moldboard reverses 35 degrees either side of bull dose
position.
►Replacable
⅜”
Polymer UHMW sheet “J” curl style
moldboard supported by
six ⅜”
flame cut ribs with
middle moldboard flat bar bracing.
►4” x 3”x ½” angle lower moldboard
support.
►Two point level lift chain arrangement
standard. |
 |
|
►Twin hydraulic cylinders of 3½”
diameter bore by 12”
stroke located on the underside of
pushframe providing
reversing action or
manual reverse available.
►Four ¾” diameter wire by 13” long torsion
spring trip edge
return system pivoting around a 1½”
sch 80 pipe retained
by ten ½”
flame cut trip edge pivot ears.
►4”x 4” x ½” backer
angle with 3/8” gusset plates punched to
accept 8” and 12” centers cutting
edges. |
►½” X 8” C-1085
reversible
cutting edge.
►Two die cast iron moldboard
and two die cast iron curb
shoes standard.
►Pushframe with
heavy duty
4” x 4” x
⅜”
HSS pushbar
spanning three attachment
points to the moldboard. |
|
|
►Six ¾” thick
moldboard
attachment ears.
►2” diameter A-frame reverse
pivot pin.
►6” x 4” x ½” angle oscillator
bar with 3/4” flame cut
ears
on 31” centers.
►Optional carbide blade and
moldboard shoes.
►Optional mushroom shoe or
10” wheel caster assemblies. |
|
Model |
Overall
Length |
Moldboard
Height |
Reverse
Method |
Cutting
Edge Length |
Moldboard
Thickness |
|
RM120TEL36P |
120" |
36" |
Hydraulic
or Manual |
120" |
⅜" Polymer |
|
RM132TEL36P |
132" |
36" |
132" |
⅜" Polymer |
|
|
"QUALITY by DESIGN"
EVEREST EQUIPMENT INC.
1077 Westmount St.
Ayer's Cliff, Quebec (Canada)
JOB 1C0
Tel: 819-838-4257
Fax: 819-838-5653 |
EVEREST
RESERVES THE RIGHT TO CHANGE PRODUCTS AND SPECIFICATIONS WITHOUT NOTICE.
|
|
|
|
|
J. C.
Madigan, Inc
Shaker Road
PO Box 745
Harvard, MA 01451
(978) 772-2067
FAX: (978) 772-2219 |
© Copyright 2000 by J.C. Madigan, Inc. |
|
