JC Madigan, Inc / Fisher Plows



		We Not Only Sell Truck Equipment, We Stock it! Home LD RD HD EZ-V MC Specifications

Fisher Snowplow Standard Features

Minute Mount^Ž System: Change from a work truck back
to the original look of your truck in about a minute.
Trip-Edge Design: Only the edge of the blade trips back when an obstacle is encountered.
Powder Coating: Baked-on protective finish along with a pre-treatment shot-blast and wash make a tough corrosion resistant finish.
Hydraulics: Insta-Act^Ž Hydraulic system provides fast lifting and angling functions with minumum amperage draw.
In-Cab Controls: Choose the hand-held FISH-STIK^Ž control with power "on" and "float" LED and automatic shut-off or the compact Solenoid Control.
Electrical: E-Force Isolation Module and light system eliminates the need for a toggle switch to change from vehicle to plow lights.

Trip-edge keeps the snow
in front of the blade when
you hit an obstacle.

Plow blade and attachments
have a tough
corrosion resistant finish

Choose the in-cab control
that is right for you.
FISH-STIK^Ž or compact solenoid.

The E-Force Isolation Module
and light system features trouble-free connections and
long term performance.

HD Plows

Designed for 3/4 and 1 ton four-wheel drive trucks as well as today's new 15,000 GVW "Super Duty" vehicles.

Features:

8', 8' 6" and 9' plows
29" high blade
Blade of heavy 11 gauge steel
Trip-edge is backed with a reinforced cutting bar at the bottom

Accessories:

Steel cutting edge of tough 1090 carbon steel

Fisher SnoFoil^Ž to funnel snow to the side
Steel or 2-ply rubber deflector to extend the height of your blade

Fisher HD Plow

MC Plows

Fisher MC Snowplow

Ideal for vehicles in the 17,000-27,500 GVW range.

Features:

9' and 10' blade widths

34" high blade

Blade of heavy 11 gauge steel

FISHER trip-edge design (10' has two 5' sections).

8' center punched reversible cutting edge

9' MC plow features 2 wear-resistant, cast-iron shoes (4 on the 10' MC)

4 compression type trip springs on 9' plow (6 on the 10' MC).

Accessories:

Fisher SnoFoil^Ž to funnel snow to the side
Steel or 2-ply rubber deflector to extend the height of your blade

EZ-V Plows

Three plows in one: it's hinged in the center to give you a scoop, straight or "V" blade - all in a matter of seconds - the ultimate in versatility and convenience.

Features:

8' 6" and 9' 6" wide blades

Hand held FISH-STIKŽ control

Insta-ActŽ Hydraulic System that allows you to hydraulically lock the blade wings to act as one.

Trip-edge blade design

Double acting cylinders to hold both blade wings in place for easy backdragging.

Accessories:

Two-piece steel cutting edge
Two-piece rubber deflector

Fisher EZ-V Snowplow

SNOWPLOW SPECIFICATIONS

Model	Plow Type	Blade Width	Blade Height	Blade Gauge	Trip Springs	Vertical Ribs	Angling Rams	Plowing Width (full angle)	Approx Weight Complete	Disc Shoes	Cutting Edge
LD 6'9"	Light Duty	6'9"	23"	14	2	4	1 ½" x 10"	6'1"	525#	none	1" x 6" Poly
LD 7'6"	Light Duty	7'6"	23"	14	2	4	1 ½" x 10"	6'9"	635#	none	1" x 6" Poly
RD 7'	Regular Duty	7'	26"	11	3	5	1 ½" x 12"	6'2"	710#	cast iron	3/8" x 6"
RD 7'6"	Regular Duty	7'6"	26"	11	3	5	1 ½" x 12"	6'7"	715#	cast iron	3/8" x 6"
HD 8'	Heavy Duty	8'	29"	11	4	6	1 ½" x 12"	7'1"	855#	cast iron	½ x 6"
HD 8'6"	Heavy Duty	8'6"	29"	11	4	8	1 ½" x 12"	7'6"	910#	cast iron	½ x 6"
HD 9'	Heavy Duty	9'	29"	11	4	8	1 ½" x 12"	7'11"	925#	cast iron	½ x 6"
EZ-V® 8'6"	V-Plow	8'6"	28 ½"	12	4	8	2" x 10"	7'6"	880#	cast iron	3/8" x 6"
EZ-V® 9'6"	V-Plow	9'6"	28 ½"	12	6	10	2" x 10"	8'10"	1049#	cast iron	3/8" x 6"
MC 9'	Muni/Comm	9'	34"	11	4	8	2" x 16"	7'11"	1690#	cast iron	½ x 6"
MC 10'	Muni/Comm	10'	34"	11	6	8	2" x 16"	8'10"	1790#	cast iron	½ x 6"

Top of Page | LD | RD | HD | EZ-V | MC | Specifications

Images and specifications are provided courtesy of Fisher Engineering and are their copyrighted property.

J. C. Madigan, Inc
Shaker Road
PO Box 745
Harvard, MA 01451

(978) 772-2067
FAX: (978) 772-2219