|
Easterner 10’ Steel Dump Body (5-7 Yard)
This body is designed for a 26,000 lb GVW chassis with an 84" CA.
- 19" side height.
- 24" tailgate height.
- 96" body width.
- 10-gauge steel sides with fully boxed dirt-shedding top rail.
- Sides include three vertcial braces with radius corner bends.
- 10-gauge steel floor.
- 10-gauge steel front panel/fully boxed top rail.
- 10-gauge fully boxed perimeter tailgate - 6-panel design.
- 4" structural steel crossmembers on 12" centers.
- 7" structural longitudinals.
- Recessed stop/tail/turn lights in rear posts.
- All appearance corners have radius bends.
- 1/2 cab protector is standard.
- Standard board gussets [fits 1 board per side].
|
|
|
Easterner 10’ Steel Dump Body (6-8 Yard)
This body is designed for medium duty chassis with an 84" cab-to-axle dimension.
- 30" side height.
- 36" tailgate height.
- 96" body width.
- 10-gauge steel sides with fully boxed dirt-shedding top rail.
- Sides include three vertcial braces with radius corner bends.
- 8-gauge grade 50 steel floor.
- 10-gauge steel front panel/fully boxed top rail.
- 10-gauge fully boxed perimeter tailgate - 6-panel design.
- 4" I-beam crossmembers on 12" centers.
- 7" structural longitudinals.
- Recessed stop/tail/turn lights in rear posts.
- All appearance corners have radius bends.
- 1/2 cab protector is standard.
|
|
|
Easterner 8'4" Steel Dump Body (2-3 Yard)
The Easterner dump body is the BIG name in small dumps. A body designed for New England conditions.
THIS UNIT ONLY FITS: 2007 and older GM 3500s with a 60" CA.
- 13" side height.
- 19" tailgate height.
- 88" or 94" overall width.
- 10-gauge Double Panel steel sides.
- 10-gauge steel floor.
- Fully boxed top rail.
- 3" structural channel cross members on 12" centers.
- 5" structural channel long sills.
- Snap Latch tailgate hardware.
- Sloped six panel tailgate.
- Vertical side braces.
- 24” cab protector with screen window.
- Direct lift hoist – Electric, PTO or clutch pump operated
- Twin body props on the direct lift hoist.
|
|
|
Easterner 9' Steel Dump Body (3-4 Yard)
The Easterner dump body is the BIG name in small dumps. A body designed for New England conditions, It is available for the Ford 550, the Dodge 5500 and the GM 4500/5500 series with a 60" CA.
- 19" side height.
- 24" tailgate height.
- 94" overall width.
- 10-gauge Double Panel steel sides.
- 10-gauge steel floor.
- Fully boxed top rail.
- 3" structural channel cross members on 12" centers.
- 5" structural channel long sills.
- Snap Latch tailgate hardware.
- Sloped six panel tailgate.
- Vertical side braces.
- 24” cab protector with screen window.
- Scissor hoist – Electric, PTO or clutch pump operated
|
|
|
Easterner 9'4" Steel Dump Body (2-3 Yard)
The Easterner dump body is the BIG name in small dumps. A body designed for New England conditions, It is available for the Ford F-350/450/550's, GM 3500's and the Dodge 3500/4500/5500 series with a 60" CA.
- 13" side height.
- 19" tailgate height.
- 94" overall width.
- 10-gauge Double Panel steel sides.
- 10-gauge steel floor.
- Fully boxed top rail.
- 3" structural channel cross members on 12" centers.
- 5" structural channel long sills.
- Snap Latch tailgate hardware.
- Sloped six panel tailgate.
- Vertical side braces.
- 24” cab protector with screen window.
- Direct lift hoist – Electric, PTO or clutch pump operated
- Twin body props on the direct lift hoist.
|
|
|
Easterner Contractor Dump Body With Fold Down Sides
The Easterner dump body is the BIG name in small dumps. A body designed for New England conditions, It is available in 10’, 12', 14', or 16' body lengths.
- 13" side height.
- 19" tailgate height.
- 96" body width.
- 10-gauge steel sides and ends.
- 10-gauge steel floor standard on 12' bodies.
- Fully boxed dirt-shedding top rail.
- 3" I-beam steel crossmembers on 12" centers.
- 7" structural channel longitudinals.
- Snap latch tailgate hardware.
- Fully boxed perimeter tailgate with two vertical braces.
- Tailgate sloped 10-degrees inward.
- Recessed stop/tail/turn lights in rear posts.
- 6" vertical side braces.
- Independently operated double door sides with removable center post.
- Single pin release system to quickly release lever.
- 24” cab protector standard on 12' bodies; 1/2 cab protector standard on 14' & 16' bodies.
|
|
|
Easterner Double Drop Side Dump Body (2-3 Yard)
The Easterner dump body is the BIG name in small dumps. A body designed for New England conditions, It is available for either the 8’4” unit for the GM 3500 with a 60” CA and the 9’4” unit for the Ford F-350/450/550's and the Dodge 3500/4500/5500 series with a 60" CA
- 13" side height.
- 19" tailgate height.
- 88" overall body width on the 8’4” unit or 94” overall body width on the 9’4” unit.
- 10-gauge Double Panel steel sides.
- Hide away double drop side
- 10-gauge steel floor.
- Fully boxed top rail.
- 3" structural channel cross members on 12" centers.
- 5" structural channel long sills.
- Snap Latch tailgate hardware.
- Sloped six panel tailgate.
- Vertical side braces.
- 24” cab protector with screen window.
- Direct lift hoist – Electric, PTO or clutch pump operated
- Twin body props on the direct lift hoist.
|
|
|
Easterner Stainless Steel Hybrid Dump Body (2-3 Yard)
The Easterner dump body is the BIG name in small dumps. A body designed for New England conditions, The 9'4" hybrid stainless steel unit is available for the GM 3500, the Ford F-350/450/550's and the Dodge 3500/4500/5500 series with a 60".
- 13" side height.
- 19" tailgate height.
- 94” overall body width on the 9’4” unit.
- 11-gauge Double Panel 304 stainless steel sides.
- 11-gauge 304 stainless steel floor.
- Fully boxed top rail.
- 3" structural steel channel cross members on 12" centers.
- 5" structural steel channel long sills.
- Snap Latch tailgate hardware.
- Sloped six panel 304 stainless steel tailgate.
- Vertical side braces.
- 24” 304 stainless steel cab protector with screen window.
- Direct lift hoist – Electric, PTO or clutch pump operated
- Twin body props on the direct lift hoist.
|
|